HKP/L DS MS, HKP/L DS MC



Basic machines 4 kN 4 kN 8 kN 12 kN 13 kN 20 kN 33 kN 45 kN 56 kN
Centre-offset eccentricity 2 kN 4 kN 8 kN 12 kN 13 kN 20 kN 33 kN 45 kN 56 kN
Towards the front of the holding fixture bore, dimension E +7 mm +7 mm +7 mm +7 mm 0 mm 0 mm 0 mm 0 mm 0 mm
Lowering of installation heigt, dimension x 41 mm 41 mm 41 mm 41 mm 46 mm 46 mm 66 mm 66 mm 66 mm
Displacement sensor, measuring accuracy at full stroke length 0,05 mm 0,05 mm 0,05 mm 0,05 mm 0,08 mm 0,08 mm 0,08 mm 0,08 mm 0,08 mm
Force sensor measuring accuracy 4 N 10 N 20 N 40 N 40 N 40 N 250 N 250 N 300 N
Force sensor measuring range 0-2 kN 0,5-5 kN 0,5-10 kN 0-20 kN 0-20 kN 0-20 kN 0-50 kN 0-50 kN 0-60 kN

 


Base

Standard press without accessories

Standard press with enlarged throat

Standard press with enlarged installation height

Accessories

Support table for lateral attachment to the press base (right side), height adjustable

Pneumatic stroke counter

Additional pushbutton control for defined triggering (e.g., for sheltered workshops)

Fine adjustment PFE

Precision depth adjustment PTE (adapter)

Centering plate with middle bore

Clamping pin without collar

Clamping pin with collar

Press base H approx. 800 x W 690 x D 565 mm adjustable with machine bearing elements

Press base H approx. 700 x W 690 x D 565 mm adjustable with machine bearing elements

Support table for lateral attachment to the press base (left side), height adjustable

Sliding table

Heavy-duty sliding table, mechanical

Heavy-duty sliding table, mechanical with locking bolt

Clamping bracket

Clamping bracket, approx. H 160 x W 130 x H 118mm (only for stands with enlarged overhang)

Clamping bracket, approx. H 160 x W 130 x H 58mm (only for stands with enlarged overhang)